STANDARD WATERFALL SERIES — 1000x400-600mm (AISI 316)

Usage & Care Notes

• If the water you use is thermal or salt water, choose an AISI 316-grade or 316-titanium-alloy stainless product.
• All products must be grounded by authorized personnel.
• Polished-surface products should be cleaned more frequently than matte products to preserve their appearance.
• Before first use, clean the product with a Scotch-Brite pad or similar material; this removes any rust effect caused by iron dust picked up during transport.
• If the product appears rusted, first check that your pool water does not contain iron.
• For products affected by iron dust, authorized personnel should apply PELOX solution while wearing gloves, goggles and a mask, rinse thoroughly with water, and restore the original finish with suitable polishing materials.
• Operate at the recommended pump power for maximum efficiency, and have all connections made by an authorized service provider.
• When ordering, specify whether the water inlet should be plain, sleeved or nippled.